Price Calculator
Volkswagen E-Crafter
The price of this journey would be
0€
Trip start fee of 0.44€ is included in the price calculation.
Please note that electric cars can be found in Lithuania and Estonia.
Lithuania:
Make sure the car is unlocked.
Open Charger socket cover on the car which is next to the driver’s door (in the case of the VW e-Crafter electric van) or behind the rear door (in the case of light electric vehicles). If the cover does not open, click “Unlock” on the car key.
In case of charging the vehicle at the “IgnitisON” or “ElintaCharge” fast charging station:
Use the right-most charging wire (“Type 2”) that is already connected to the charging station.
Attention: Wire configurations may vary in some charging stations, so you can only find a Type 2 or “CCS” type wire.
Take the car keys and find the charging token attached (there are two tokens: one for “IgnitisON” and one for “ElintaCharge”).
Approach the charging station and scan the charging token.
Choose the charging slot (“Pasirinkite jungtį”) by pressing a button next to the shown option.
Press the button “Pradėti” to start charging.
In case of charging the vehicle at a 2-slot “ElintaCharge” station:
Take the charging wire from under the middle seat of a CityBee car:
• In the case of the VW e-Crafter electric van – under the front center seat.
• In the case of a passenger car – to the spare wheel space in the trunk.
2. Put one side of the charger wire in the car electric socket and another side into the charging station.
3. Scan the RFID token with “ElintaCharge” written on it.
4. The word “Charging” should start lightning, which means the vehicle is being charged.
Check the car’s charging socket (the green light should be lightning; if there is an orange light or no light at all, it means that the car is not being charged) and the information screen behind the steering wheel (it should indicate that the car is being charged with an indicated time left until fully charged).
Estonia:
Make sure the car is unlocked
Open the charger socket cover, which is located behind the rear door. If the cover does not open, click “Unlock” on the car key.
Charging the vehicle in ‘Eleport’ charging station:
Take the ‘Eleport’ charging card from the sun visor and tap it on the screen
Select either ‘CCS’ or ‘Type 2’ charging option and connect it to the car
Press ”start charging” to start the charging process
To make sure the car is charging, check the charging port to see, if there is a green light.
You can find the fuel type in the CityBee app, under active reservation.
At least one payment card must be linked to a CityBee account. You can link more than one payment card and choose from which card you will be billed for services before each trip. It is important that the card type is VISA or MasterCard and that the secure internet shopping function is activated.
How do I activate the secure internet shopping function?
1. SEB: Log in to your internet bank and look for “Accounts and Cards” -> “Card List” in the menu bar at the top. You’ll see all of your cards that can be registered with the secure internet shopping programme. Next to the desired card in the options below, click on “Online Billing” and click “Enable”.
2. Swedbank: Log in to your internet bank and look for “Cards” -> “Secure internet shopping” in the menu bar on the left. You’ll see all of your cards that can be registered with the secure internet shopping programme. Select the desired card next to the note “Online Billing” and click “Enable”.
3. Šiaulių Bankas: Log in to your Internet bank and in the menu on the left, select “Cards” -> “Secure payment” -> select the payment card for which you want to activate the secure internet shopping and click “Register” -> enter the requested data and confirm it by pressing the “Enter and Sign” button -> soon the status of the card will change to “Registered”.
4. Luminor bank: Log in to your Internet bank and in the menu, select the item “Payment cards” -> select the payment card for which you want to activate the secure internet shopping and in the opened window click “Secure shopping service settings” -> select the “Order service” button -> enter the requested data, which the bank will show you later during the purchase -> click “Order service”.
5. Citadele bank: No additional activation of the secure internet shopping is required.
If you forget your personal belongings in a CityBee car, you can retrieve them by:
Reserving and unlocking your last car as usual.
You can retrieve your items for free for 24 hours after your last journey.
You have 5 free minutes to collect your belongings, do not turn on ignition if you don’t plan to use the car. If the car will be used for longer than 5 minutes, a paid reservation will start automatically.
Please note, that if you do not recover your items within 24 hours, you can find the car location, where the items were left, by using this link. If you are unable to find the car you are looking for, please, be patient, somebody is using it right now:
LT: https://map.citybee.lt/#/main-map
EE: https://map.citybee.ee/#/main-map
LV: https://map.citybee.lv/#/main-map
If you need more assistance, contact us at info@citybee.lt, info@citybee.lv, info@citybee.ee or in-app chat.
During the validity period of your CityBee subscription plan, you can choose trip packages for longer trips, which are available for an additional cost.
If the barrier did not open automatically, call the airport information line (+372) 605 8888. If you still had to pay for parking yourself, please keep the receipt so that we can refund you the amount paid for parking.
If the car gets dirty during a long-term rental in Lithuania, we offer several options:
Go to the PRO BRO tunnel car wash and wash your car for free;
Contact us by +37070044844, Facebook or via email info@citybee.lt.
If the car gets dirty during a long-term rental in Latvia, please contact us by calling +371 27265460 and we will provide you further details.
If the car gets dirty during a long-term rental in Estonia, please contact us by +372 600 0160, Facebook or via email info@citybee.ee and we will provide you further details.
In that case, we recommend purchasing a pre-paid trip package. Before starting your trip, you can choose whether you want to use a subscription plan trip or buy a pre-paid package. You can select from available packages or create your own.
The price of this journey would be
0€
Trip start fee of 0.44€ is included in the price calculation.
The car has an automatic gearbox, so the gears are switched by pressing the brake pedal, pressing the button on the gear switch, and putting the switch in the desired position.
P – Parking
R – Reverse gear
N- Neutral gear
D – Drive gear
B – The slow gear. This gear charges the battery for the electrical engine while driving.
The electric car starts exactly the same as a standard car with an internal combustion engine – by turning the key in the ignition switch or pressing the “Start engine” button.
Important: The engine won’t start until you fasten your seat belt.
the electric car’s engine like every hybrid car runs very quietly, so you won’t hear it start.
The cargo area can be opened by pressing the button on the driver’s door or the button on the car’s key.
All documents can be found in the storage box.
The car lights are turned on by turning the switch under the steering wheel on the left side.
Turns and high beam are connected by a lever on the left side behind the steering wheel.
Make sure the car is unlocked.
Open the cover of the car’s charging socket, which is located next to the driver’s door. If the cover does not open, one more time click “Unlock” button on the car key.
If you charge the car at an IgnitisON or ElintaCharge quick charge station, use the cable located on the right side of the station (“Type 2”) which is connected to the station:
1. Take the car key with the attached charging token (RFID key; you will find two different tokens next to each key: one for IgnitisON and the other for ElintaCharge charging stations).
2. Firstly, choose the charging token from the respective supplier at the charging station.
3. Select the charging connector by clicking the button next to “Select connector”.
If you charge the car at the 2-port Elinta Charge charging station:
1. Take the charging cable that is located under the front center seat of your CityBee car.
2. One side of the charging cable connect to the charging socket of the car and the other to the socket of the charging station.
3. Scan the ElintaCharge token at the specified location on the charging station.
4. The word “Charging” should light up at the charging station to indicate that the car is being charged.
5. Check the car’s charging socket: the green light should be on while the car is charging. If the light is off or orange, the car is not charging. Also check the vehicle information display (in the information panel behind the steering wheel): the time remaining until the vehicle is fully charged should be displayed.